background image

19

De-Registration

De-registration cancels registration. During the de-registration process, keep the 

handset near the base.

From the Initial Setup Menu:

1.  Press the 

caller ID-volume

 (

5

 or 

6

) button to scroll to the 

DEREGISTRATION

  

sub-menu.

.  Press the 

mute/menu OK

 button to enter the menu. The screen displays 

YES

4

NO

The default setting is 

NO

.

.  Use the 

caller ID-volume 

(

5

 or 

6

) button to scroll to 

YES

 or 

NO

.

WARNING: It is not recommended that a handset be  

de-registered unless absolutely necessary because once a 

handset is de-registered, that handset’s telephone features 

cannot be used until the handset is re-registered.

.  Select 

NO

, if you do not want to de-register.

5.  If you select 

YES

, press the 

mute/menu OK

 button and 

MOVE NEAR BASE

 displays 

for seconds, then the screen displays 

YES NO

.

6.  Use the 

caller ID-volume

 (

5

 or 

6

) button to scroll to 

YES

 or 

NO

.

7.  If you select YES, press the 

mute/menu OK

 button to confirm. The screen displays 

DE-REGISTER...

. You will hear a confirmation tone. Then the screen displays 

DEREGISTERED

 to confirm the handset is deregistered.

NOTE: When you complete the de-registration process, the screen 

displays HANDSET NEEDS REGISTRATION. To use the handset, you 

MUST re-register the handset using the Registration process.

Summary of Contents for 28213 Series

















































Reviews: