background image

43

Limitation of Warranty:

• The warranty stated above is the only warranty applicable to this product. 

All other warranties, express or implied (including all implied warranties of 

merchantability or fitness for a particular purpose) are hereby disclaimed. No 

verbal or written information given by Thomson Inc., its agents,  

or employees shall create a guaranty or in any way increase the scope of this 

warranty.

• Repair or replacement as provided under this warranty is the exclusive 

remedy of the consumer. Thomson Inc. shall not be liable for incidental or 

consequential damages resulting from the use of this product or arising 

out of any breach of any express or implied warranty on this product. This 

disclaimer of warranties and limited warranty are governed by the laws of the 

state of Indiana. Except to the extent prohibited by applicable law, any implied 

warranty of merchantability or fitness for a particular purpose on this product 

is limited to the applicable warranty period set forth above.

How state law relates to this warranty:

• Some states do not allow the exclusion nor limitation of incidental or 

consequential damages, or limitations on how long an implied warranty lasts 

so the above limitations or exclusions may not apply to you.

• This warranty gives you specific legal rights, and you also may have other 

rights that vary from state to state.

If you purchased your product outside the USA:

• This warranty does not apply. Contact your dealer for warranty information.

Summary of Contents for 28011















































Reviews: