GE 24959, Instruction Manual

Page: 6 / 20

6
Initial Setup
Battery Installation
1. On the back of the remote, push down on the
tab and lift the cover off.
2. Match the batteries to the + and - marks inside
the battery case, then insert 2 AAA Alkaline
batteries.
3. Press the battery cover back into place.
Battery Saver
Your remote automatically turns off if the buttons
are depressed more than 30 seconds. This will
save your batteries should your remote get stuck in
a place where the buttons remain depressed (e.g.,
or for instance, between the sofa cushions).
Code Saver
Codes are stored in permanent memory while you
are changing batteries so that you will not lose any
codes stored in the remote while you are changing
batteries.
Code Setup
The SETUP button is used to setup the remote.
You can either setup the remote using the code
for your brand of product, from the code tables (on
separate sheet), or you can search through the
library of codes until you
fi nd a code that works for
your product.
Please refer to “Code Search” on page 8 for more
information on using the code search feature to
learn how to search through the library of codes for
your products.