manualshive.com logo in svg

GE 21880, User Manual, Page: 34 / 40

Share
Download
GE 21880 User Manual Download Page 34

– 33 – 

Teleconference (Cored base station to 
Handset) 

After have received an external call, it is possible to include a 
cordless handset in the conversation (three way conference). 

 

press “PAGE” key and press [1 or 2 or 3 or 4], the handset 
number you want to call. The called cordless handset rings and 
“INT” icon is displayed and blink.   

 

Press 

  key on handset, a 3 way conference is established.   

 

When you hang up the corded base station, external line is then 
transferred to the cordless handset. 

 
 
 

 

 

 

 

 

Teleconference (Cordless Handset to Corded 
base station) 

After have received an external call, it is possible to include a corded 
base station in the conversation (three way conference). 

 

press “INT” key and press digit [0]. The corded base station  
rings.  

 

Press base station   key or pick up the corded handset, a 3 
way conference is established.   

 

When you press 

  key on the cordless handset, external line is 

then transferred to the corded base station. 

Note:  

1. There is no intercom between cordless handset and corded base
station. 
2. If cordless handset does not answer, press “PAGE” key again can
stop paging. 
3

. 

With base station in standby mode, if “PAGE” key is pressed over 4

seconds, base station will enter the Registration mode. “PAGE” key
does not function, “REGISTER” is displayed and In-use LED blinks.
Registration mode EXIT only after 5 minutes or 

Reset AC power of

base station.                 

Summary of Contents for 21880









































Reviews:

No comments