manualshive.com logo in svg

GE 21880, User Manual, Page: 27 / 40

Share
Download
GE 21880 User Manual Download Page 27

– 26 – 

key is pressed and hold for more than 4 seconds.  After selecting 
“REGISTER”, the handset starts searching for a base station which is 
available for registration. The “Aerial” icon starts flashing. 
 
If a base is found, user will be asked to enter the personal 
identification number PIN for that base. If the input PIN is correct, 
the registration procedure will be completed with a confirmation tone 

Base Station Settings (using the Handset) 

Barring Calls 

The following options are available for selection for barring calls: 
Option Description 
DISABLE 

All telephone calls are possible. 

EXTERNAL 

All external calls are barred. 

NUMBER 

Phone number starting with that number will be 
barred, e.g. 0190 

 

Press 

 key until the BASE menu appears and press 

“INT/OK” key. 

 

Press 

 or 

 key to select the submenu BARRING and 

press “INT/OK” key. 

 

Enter the PIN (factory setting is 0000) and press “INT/OK” key. 

 

Use 

 or 

 key to select the handset which should be 

barred and press “INT/OK” key. 

 

Use 

 or 

 key to select DISABLE/EXTERNAL/ 

NUMBER and press “INT/OK” key. 

 

Enter a number with maximum 5 digits. Then press [INT/OK].   

 

Changing the PIN 

(personal identification number)   

 

Press 

 key until the BASE menu appears and press 

“INT/OK” key. 

 

Press 

 or 

  key to select the submenu ‘Change PIN’ and 

press “INT/OK” key. 

Summary of Contents for 21880









































Reviews:

No comments