3
Basic Guidelines For Working With Electricity
1.
Before working on a circuit, go to the main service panel
and remove the fuse or turn off the breaker that controls
that circuit.
2.
Tape a sign to the panel warning others to leave the circuit
alone while you work.
3.
Before touching any wire, use a voltage tester to make
sure it’s not live.
4.
Whenever you check for voltage in a receptacle, check
both outlets; each may be controlled by a separate wiring
circuit.
5.
When replacing fuses, turn off the main power first. Make
sure your hands and feet are dry, and place one hand behind
your back to prevent electricity from making a complete
circuit through your chest. Touch a plug fuse only by its
insulated rim.
6.
Remove cartridge fuses with fuse puller.
7.
Use tools with insulated handles and ladders made of
wood or fiberglass.
8.
To protect children, place safety cover over any unused
outlets.
Shut off main
power at the
circuit breaker
or fuse panel
before removing
old fixture.
Remove
old fixture.
Disconnect wire.
5,,
MAIN
POWER
