Remote Control
1 2 3 4
1
2
3
4
(summer)
(winter)
Fan speed indicators.
Indicates the fan is running counterclockwise (downward airflow).
Indicates the fan is running clockwise (upward airflow).
Changes the direction of rotation of the fan.
Turns fan on and reduces fan speed.
Power ON/OFF
Turns fan on and increases fan speed.
Delays the light turning off for approximately 5 seconds, enabling you to exit
your room before the light turns off completely.
Controls the light and brightness setting.
Press and release the button to turn the light ON or OFF.
Press and hold the button to set the desired brightness.
The light button has an auto-resume, it will stay at the same brightness as the
last time it was turned off.
14
IMPORTANT : If the remote control is not
operating correctly, please follow the steps
on page 13 for pairing. Use the corner of
the battery cover to press the "Sync"
button for syncing function.
NOTE:
-To prevent damage to transmitter, remove all batteries if not used for long periods.
- Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or
batteries of different types.
-Please contact your local batteries recycling center for proper battery disposal information.
“O” and “I”
dim switch
The dim switch should be in the “
I
” position, for dimming the light. Place the
switch in the “
O
” position to turn the dimming feature off.
“Sync”
button
Allows receiver to pair with the code assigned by the transmitter.
“Lock/Unlock ”
switch
NOTE: The transmitter has been preset in the unlock position. The
receiver has been preset with a common code. The transmitter can control
one or more fans with this initial setting.
