background image

9

U

SING

 

THE

 H

ANDSET

The only difference between using the handset with this phone and other
corded phones is that you must press a line number button after picking
up the handset in order to access that line.

T

ELEPHONE

 O

PERATION

You can use the telephone by speaking and listening through the handset,
or by using the Speakerphone feature.

L

INE

 S

TATUS

 I

NDICATOR

 L

IGHTS

This two-line phone is designed for use at multiple stations, the status  of
the indicator lights tells you what is happening on each line.

When the Indicator Light Is

It  Means

Off

Line not in use

Red

Line in use

Flashing Red

Incoming call

Blinking

Call on hold

S

PEAKERPHONE

 L

OCATION

 & U

SE

 G

UIDELINES

For best speakerphone performance, avoid the following:

• Areas with high background noise. (The microphone might pick up

these sounds and prevent the speakerphone from going into the
receiving mode when you finish talking.)

• Surfaces affected by vibration.

• Recessed areas such as in a corner, under a cupboard,

 or next to a cabinet, which can generate an echo effect.

Note the following guidelines when you use the speakerphone:

• The speakerphone works similar to a two-way radio in that you can only

listen or talk at one time.

• Stay reasonably close to the phone so that you can be clearly heard by

the person to whom you are talking.

• The speakerphone indicator light is on when the speakerphone is in use.

A

NSWERING

 

AND

 P

LACING

 C

ALLS

Because this phone has two lines, you must choose a line by pressing the
corresponding line button in order to place an outgoing call or to answer
an incoming call.

NOTE:

  Batteries must be installed for the indicator lights to work.

Summary of Contents for 2 2-9432 2-9432



















Reviews: