GE Security Simon XT, User Manual

Page: 50 / 60

Simon XT
User Manual
44
Alarm system limitations
Not even the most advanced alarm system can guarantee protection against burglary, fire, or environmental
problems. All alarm systems are subject to possible compromise or failure-to-warn for a variety of reasons.
• If sirens are not placed within hearing range of persons sleeping, in remote parts of the premises, or if
they are placed behind doors or other obstacles.
• If intruders gain access through unprotected points of entry or areas where sensors have been
bypassed.
• If intruders have the technical means of bypassing, jamming, or disconnecting all or part of the system.
• If power to sensors is inadequate or disconnected.
• If freeze or any environmental sensors are not located in areas where the appropriate condition can be
detected.
• If smoke does not reach a smoke sensor. For example, smoke sensors cannot detect smoke in
chimneys, walls, roofs, or areas blocked by a closed door. Sensors may not detect smoke in other levels
of the building. Sensors may not warn in time when fires are caused by smoking in bed, explosions,
improper storage of flammables, overloaded electrical circuits, or other hazardous conditions.
• If telephone lines are out of service.
Inadequate maintenance is the most common cause of alarm failure. Therefore, test your system at least once
per week to be sure sensors, sirens, and phone communication are all working correctly.
Although having an alarm system may make you eligible for reduced insurance premiums, the system is no
substitute for insurance.
WARNING: Security system devices cannot compensate you for the loss of life or property.