GEC-EVR/GEC-EVR-DN
User Manual
14
2. Connect the TX terminal to pin 2 on a
DB9 connector.
3. Connect the GND terminal to pin 5 on a
DB9 connector.
Note:
The NC terminal does not connect to
anything.
PC
To configure the camera with a PC, do the
following:
1. Connect the DB9 connector to the serial
port (COM1) of your PC.
2. In a Windows 95/98/ME/2000/XP
system, insert the floppy disk that came
with the camera into the floppy disk
drive.
3. Click
Start
>
Run
>
Browse
. Navigate
to the disk drive, and double-click the
OSD_CONT.EXE
file.
4. The
OSD Control
program will display
on your screen (
Figure 5
on page 15).
