Chapter 2
Controls
15
Figure 5. The OSD program.
5. Click the center button to display the
Main Menu
on the display monitor. Use
the arrow buttons or your PC’s keyboard
to navigate and select menu items.
6. Click on
Exit
to close the program.
Note:
Try the following steps if the OSD Control
program doesn’t function as stated.
•
Make sure the RS-232 cable is wired
correctly.
•
Run the
patch.exe
program on the
provided floppy disk.
•
Click on the
Setup (S)
button to make
sure the correct COM port is selected.
