manualshive.com logo in svg

GE Security DVMRe Matrix, User Manual

Share
Download
GE Security DVMRe Matrix User Manual Download Page 20

0150-0242D 

20 

GE Security DVMRe

 

Matrix 

 

If the 

Zoom

 button is pressed while in a multiscreen display, the camera from the last active 

cameo is selected for full screen display.  Press the 

Zoom

 button again to activate the Zoom 

operation. 

 
Searching Recorded Data 

The DVMRe Matrix has a powerful search interface feature that allows the user to search for data on 
the internal hard disk or an external archive device.  The user may search the data for previous 
recording sessions, text insertion, alarm conditions, or for motion in a selectable area of the scene.  
Because the search interface is so dynamic, the search interface is covered in detail in a separate 
section of this manual.  See section 5. 

 
2.5  Recording 

 

To begin recording, press the 

Record

 button.  Recording will be indicated by the 

LED located directly above the 

Record

 button.  The unit always starts recording 

at the end of previously recorded data. 
The unit will continue recording until the record button is pressed again. 

Record Button  

 

Monitor Displays During Recording 

Multiscreen Live and Playback displays on Monitor A and Monitor B are not affected by recording 
operations. 

 

 

LIVE

PLAY

BACK

PLAY

BACK

LIVE

LIVE

LIVE

LIVE

LIVE

LIVE

LIVE

LIVE

LIVE

Monitor A

Monitor B

Monitors C, D, E

or

or

 

Summary of Contents for DVMRe Matrix

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands