GE Security Digia 204, User Manual

Page: 13 / 46

Chapter 1
Introduction
5
C
Playback status bar. The playback status bar appears when you enable the OSD (onscreen display) in the Display
menu. There are three parts to this display bar, which are:
• Record date - Displays the date when the video was recorded.
• P01 - Displays that video is currently playing back from the hard drive.
• Percentage - Displays the location on the hard drive where the video was recorded.
• Playback status - Displays the direction and speed of playback. Pause means the video is paused. > means
normal playback speed. < means normal reverse playback speed. >> x N means N times fast playback speed.
<< x N means N times fast reverse playback speed. ||>> means forward slowmotion playback. <<|| means
reverse slowmotion playback.
• Record time - Displays the time when the video was recorded.
D
Record status bar. The record status bar appears when you enable the OSD (onscreen display) in the Display menu.
There are three parts which are:
• Current date - The current date.
• Record status - Shows R01, which means its recording the video feed to the hard drive.
• Percentage - Displays the amount of hard drive remaining.
• HDD/Fan status - Shows
No Disk if no disk is installed, and/or No Fan if the cooling fan stops working.
• Current time - The current time.