PRESS
PRESS
PRESS
PRESS
Adding/Replacing
Sensors to CareGard
™
Procedure for Adding/Replacing a Panic Sensor
CareGard allows up to 24 panic sensors to be added to your system. It is a very simple and easy
process. If you have purchased an
additional
wrist or pendant sensor and wish to add it to your
system, just follow the simple steps below. And remember, all kits come with one wrist sensor that
was enclosed in the kit and it is already enrolled in your system. It does not have to be added using
the steps below. Only if you have purchased
additional panic sensors
are the steps below necessary.
1.
Press the
Menu button
on the back of the
CareGard base unit until the panel announces
”Add sensor. Press status to select”.
2.
Press the
Status button
on the front of the
CareGard base unit.
3.
Press the
panic sensor button
. (You have 8
seconds to do this.) The panel will announce
“Press status to accept panic sensor.”
4.
Press
Status button
when prompted.
5.
That’s it!! Your sensor has been added. This
may be repeated as many times as needed to
add sensors to your CareGard.
