GE Security 60-792-01-95R, User Instructions

Page: 40 / 68

Concord
32
User information is shown in the following table.
Lost Event LOST EVENT
Main Unit Tamper MAIN UNIT TAMPER X
Memory Clear MEMORY CLEAR
Memory Failure MEMORY FAILURE
No Activity Alarm ACTIVITY ALARM X
No Activity Cancelled ACTIVITY CANCEL X X
Opening Report OPENING REPORT X X X X
Phone Failure PHONE FAILURE X
Phone Line Test Failure PHONE LINE FAIL
Phone Line Test Restoral PH LINE RESTORED
Phone Test PHONE TEST X X X
Police Panic POLICE PANIC X X
Police Panic Cancelled CANCELLED X X
Receiver Failure RECEIVER FAILURE X X
Receiver Jam RECEIVER JAM X X
Recent Closing RECENT CLOSING X X X
Remote Access Lockout REMOTE LOCKOUT
Repeater Jam REPEATER JAM X X
Repeater Jam Restoral JAM RESTORED X X
Siren Trouble SIREN TROUBLE
Swinger Shutdown SWINGER X
Time Change TIME CHANGE
Touchpad Tamper TOUCHPAD TAMPER X X
Touchpad Tamper Cancelled TP TAMPER CANCEL X X
Two Trip Error TWO TRIP ERROR X X
User Programming Entry USER PROG ENTRY X X X
User Programming Exit USER PROG EXIT X X X
Zone Alarm ALARM X X
Zone Alarm Cancel ALARM CANCELLED X X
Zone Alarm Restoral ZONE RESOTRED X X
Zone Battery Restoral BATTERY RESTORED X X
Zone Bypass BYPASSED X X X
Zone Low Battery LOW BATTERY X X
Zone Supervisory SUPERVISORY X X
Zone Tamper TAMPER X X
Zone Trouble TROUBLE X X
Zone Trouble Restoral TROUBLE RESTORED X X
Zone Unbypass UNBYPASSED X X X
1
Source information will only be shown if the information was available when the event was buffered.
2
User information will only be shown if the information was available when the event was buffered.
3
Line two of the display also contains “P-C” where P is the previous arming level and C is the current arming level.
Event Display Partition
Current
Arming
Level
Zone
Bus Unit
Number
Source
1
User
2