Concord
20
Pager Messages
When an event is reported on a numeric pager, the following information is included:
Figure 8. Pager Messages
Although all three types of information can be reported on your pager, your pager service deter-
mines how the information will actually appear.
Event Code in Page
This part of the page let’s you know
what
has happened.
Sensor Number or User Number in Page
This part of the page let’s you know
who
or
what
is causing the event.
Touchpad Tamper
Bus Failures
•
Opening and Closing Reports
•
Latchkey Reports
•
Notify by Exception Reports
Code
Indicates
009
A sensor has been restored to its non-alarm state
111
System has been disarmed
115
Sensor test exit
118
System trouble has been fixed
119
System alarm condition has been cancelled
222
System armed to Level 2—STAY
333
System armed to Level 3—AWAY
555
System phone/sensor test
888
System has a trouble condition
999
System is in alarm condition
If a user arms the system to level 3 (AWAY) the pager will report that the system was armed to
level 3 (333). However, if the Auto Stay Arming feature is enabled and the user does not exit
the premises, the arming level will revert to level 2 (STAY) without notifying the pager. Refer to
the User Sheets in Appendix A to see whether this feature is on or off.
Code
Indicates
000
System event not caused by a sensor or user
001 — 096
Sensor numbers 1 through 96
600 — 829
User codes 00 through 229 used
846
System Master code used
847
Installer code used
848
Dealer code used
850
Quick Arm used
Event Code
Last four digits of central
station account number
Sensor number or user number
Summary of Contents for 60-792-01-95R
Page 59: ...Concord 51 Floor Plan...
