II
1200C-2000C Fire Alarm Control Panel, Repeater, and Black Box Installation Manual
Important information
Introduction
This is the installation manual for GE Security FP1200C-2000C addressable fire
control panels, repeaters, and emulators. Read these instructions and all related
documentation entirely before installing or operating this product.
All 1200C-2000C control panels are designed to comply with the requirements of
European standards EN 54-2 for control and indicating equipment, and EN 54-4 for
power supply equipment)
For further details on EN 54 compliance and for a complete list of CPD-compliant
control panels in this range, see “Appendix E: Product compliance” on page 41.
Product compatibility
All models are compatible with GE Security
Aritech
fire detectors and manual call
points. Compatibility with third-party products cannot be guaranteed. Consult your
local supplier for further information.
Support
For assistance installing, operating, maintaining, and troubleshooting this product,
please contact your local supplier.
Limitation of liability
Installation in accordance with this manual, applicable codes, and the instructions of
the authority having jurisdiction is mandatory. GE Security shall not under any
circumstances be liable for any incidental or consequential damages arising from
loss of property or other damages or losses owing to the failure of GE Security
products beyond the cost of repair or replacement of any defective products.
GE Security reserves the right to make product improvements and change product
specifications at any time.
While every precaution has been taken during the preparation of this manual to
ensure the accuracy of its contents, GE Security assumes no responsibility for errors
or omissions.
