Quick Start 17
LOGIQ
t
400 Quick Start Guide
2237879–100 Rev. 0
Color Flow Mode (CFM) Controls
There are four Soft-Menu pages for Color Flow Mode imaging adjustments.
CFM Map—Allows for the selection of how Doppler velocities are mapped as
color over the gray scale.
Slant Scan—Used to control the position of the CFM window for linear
probes only.
Diag Mode—Allows for the selection of the best color flow display format.
MTI Filter—Filters out low flow velocity color.
Frame Average—Averages color information from previous frames with the
current frame.
Penet—Penetration can be increased by lowering the operating frequency of
the active probe.
High Resoltn—Provides a quick way to maximize resolution for the CFM
display.
Display Thrshld—Gray scale level at which the overlay of color information
stops.
Capture—Displays the highest mean velocity (average velocity) detected
over a specific time interval.
MTI
Filter
LOW
Diag
Mode
MAP
CFM
1/4
CFM
Map
Slant
Scan
VT–1
+
Capture
Display
Thrshld
High
Resoltn
Frame
Average
CFM
Penet
32
MID
2/4
OFF
Summary of Contents for LOGIQ 400
Page 2: ......