GE Interlogix CONCORD Express, Installation Instructions Manual, Page: 22 / 64

19
Programming the Panel
The following describes how to program the phone settings
that appear under DOWNLOADER PHONE.
Phone Options Menu
The PHONE OPTIONS menu lets you set up system phone
access and communications that affect the whole system
(global) or a specific partition.
The following describes how to program the phone option
settings that appear under GLOBAL .
Low Level Rpts (Phones—Pager Phone 1-3)
(0122-pager 1, 0132-pager 2, 0142-pager 3)
(Default = off) When this setting is on, the panel reports
non-alarm conditions to the pager, including the following
conditions:
q
Force Armed
q
Hardwire Zone Trouble (open or short)
q
Supervisory (wireless devices)
q
Low Battery (wireless devices)
q
Other non-alarm related conditions
To turn Low-Level Reports off or on:
With the display showing LOW LEVEL RPTS OFF/
ON (current setting), press
1
(off) or
2
(on).
The display flashes the entered setting. Press
ƒ
and
the display shows LOW LEVEL RPTS OFF/ON (new
setting).
Open/Close Rpts (Phones—Pager Phone 1-3)
(0123-pager 1, 0133-pager 2, 0143-pager 3)
(Default = off) When this setting is on, the panel sends a
report when the system is armed (closed) or disarmed
(opened).
œÌi
To use this feature, the OPENING REPORTS and
CLOSING REPORTS settings under the
REPORTING menu must be turned on.
To turn Opening/Closing Reports off or on:
With the display showing OPEN/CLOSE RPTS OFF/
ON (current setting), press
1
(off) or
2
(on).
The display flashes the entered setting. Press
ƒ
and
the display shows the new setting.
Latchkey Rpts (Phones—Pager Phone 1-3)
(0124-pager 1, 0134-pager 2, 0144-pager 3)
(Default = on) This setting determines whether or not the
panel reports to a pager when the system is disarmed by
using the latchkey modifier (
6
) and latchkey designated
access code.
To turn Latchkey reports off or on:
With the display showing LATCHKEY REPORTS
OFF/ON (current setting), press
1
(off) or
2
(on).
The display flashes the entered setting. Press
ƒ
and
the display shows the new setting.
Streamlining (Phones—Pager Phone 1-3)
(0125-pager 1, 0135-pager 2, 0145-pager 3)
(Default = on) This setting determines whether the panel
includes (off) or excludes (on) the account number when
reporting to a pager.
To turn Streamlining off or on:
With the display showing STREAMLINING OFF/ON
(current setting), press
1
(off) or
2
(on).
The display flashes the entered setting. Press
ƒ
and
the display shows the new setting.
Phone Number (Phones—Downloader)
(0150)
(Default = none) This setting is used for entering the phone
number of a computer used for programming the panel
from off-site. Phone numbers can be 1 to 24 digits long,
including pauses or * and # characters. To enter pauses,
press
C
. To enter *, press and hold
7
for one second. To
enter #, press and hold
9
for one second.
œÌi
Call-waiting services should be disabled to prevent
interruptions to panel communication to the central
monitoring station (or pager). To program a dialing
prefix that disables call-waiting, see the
CALL
WAIT CANCEL setting under the menu PHONE
OPTIONS—GLOBAL.
To program a downloader phone number:
With the display showing PHONE NUMBER (current
number), enter the desired phone number.
The display flashes the entered number. Press
ƒ
and
the display shows the new setting.
To delete a downloader phone number:
With the display showing PHONE NUMBER (current
number), press
D
.
The display shows PHONE NUMBER _.
Phone Test (Phone Options—Global)
(02000)
(Default = on) This setting determines if the user can test
the communication from the panel to the central station (or
a pager). When this feature is on, the user can test
communications at any time by entering
8
+
CODE
+
2
.
To turn the Phone Test setting off or on:
With the display showing PHONE TEST OFF/ON
(current setting), press
1
(off) or
2
(on).
The display flashes the entered setting. Press
ƒ
and
the display shows the new setting.