– 24 –
Key Panel Test
Touch each pad. Pads should light in response, except CLEAR/OFF and COOKTOP Pads. Each pad must be
individually tested. Number pads, +/-, etc., respond only after a function is selected.
LIN Test
Press the OVEN LIGHT pad. Corresponding relay(s) should click and oven lamps should respond. If successful,
LIN bus is not the cause of nonworking elements.
Test Mode
The entry to the test mode is available for 3 min. after power up by pressing 1 and 5 pads together. The
display will switch to "tEST".
Pressing the CLEAR/OFF pad exits the test mode.
When a test feature is selected, it remains for 10 seconds, then returns to the "tEST" standby.
Power On -> Push 1 + 5 key
Normal Ttest Mode
Key
Display FOR 10 SEC
Relay(s)
U START
-
Upper Conv Fan On 10 sec
L START
-
Lower Conv Fan On 10 sec
U BAKE
-
Upper Bake On with Upper DLB On 10 sec
L BAKE
-
Lower Bake On with Lower DLB On 10 sec
L CONV
-
Lower Conv On with Lower DLB On 10 sec
L PROBE
Upper/Lower Probe Temp
-
U BROIL
-
Upper Broil1 On with Upper DLB On 10 sec
L BROIL
-
Lower Broil1 On with Lower DLB On 10 sec
U CLEAN
Upper/Lower Door State
Upper Door On
L CLEAN
Upper/Lower Door State
Lower Door On
U COOK TIME
Upper/Lower Oven Sensor Temp and ROM version
-
L COOK TIME
Upper/Lower Oven Sensor Temp and ROM version
-
U DELAY TIME
Model ID and EEPROM Checksum
Upper Conv Fan Direction On with Upper Conv Fan On 10 sec
L DELAY TIME
Model ID and EEPROM Checksum
Lower Conv Fan Direction On with Lower Conv Fan On 10 sec
U OVEN LIGHT
-
Upper Oven Light On 10 sec
CLOCK
All WING-L and WING R LEDs while held.
-
TIMER ON
Mini Light Box and 10 digits all LEDs
-
TIMER OFF
all WHITE key LEDS
-
LOCKOUT
-
Energize Cooktop Lock relay (for non wing models) 10 sec
10KEY 1
1
UBroil2 relay w/DLB for 10 sec
10KEY 2
2
LBroiul2 relay w/ DLB for 10 sec
10KEY 3
AC input voltage from RPSM J20
-
10KEY 4
AC inputs on RPSM J21. 5 bits.
-
10KEY 5
Buzzer level HI --> Md --> Lo
-
10KEY 6
6
-
10KEY 7
7
-
10KEY 8
Lin Slave1(RPSM) Program Version
-
10KEY 9
Lin Slave4(Aux) Program Version
-
RF ON/OFF
RF - g seg
Cooktop DLB1 + RF-M + RF-I + RF-O for 10 sec
RF-
RF - L
Cooktop DLB1 + RF-I for 10 sec
RF+
RF - H
Cooktop DLB1 + RF-I + RF-M for 10 sec
RF SIZE/SIMMER
size LEDs x 3
-
RR ON/OFF
RR - g seg
Cooktop DLB2 only for 10 sec
RR-
RR - L
Cooktop DLB2+ RR for 10 sec
RR+
RR - H
-
LF ON/OFF
LF - g seg
Cooktop DLB2 + LF-I + LF-O for 10 sec
LF-
LF - L
Cooktop DLB2 + LF-I for 10 sec
LF+
LF - H
Cooktop DLB2 only for 10 sec
LF SIZE/SIMMER
1/2 in LF digit
-
LR ON/OFF
LR - g seg
Cooktop DLB2 only for 10 sec
LR-
LR - L
Cooktop DLB2 + LR for 10 sec
LR+
LR - H
Cooktop ALL RELAYS ON 30 sec
LR MELT
1/2 in LR digit
-
WZ ON/OFF
WZ - g seg
Cooktop DLB2 + CR for 10 sec
WZ SELECT
zero (0) in WZ digit
-
