47
Check whether the remote controller is properly connected to the aircraft.
Always operate with the latest firmware. And check whether the GDU Mini APP and the
remote controller are connected normally.
Check whether the motor and gimbal camera work normally after the aircraft is started.
Magnetometer Calibration
Calibrate the magnetometer according to the following procedures in
an
open space. For more
information, watch the related teaching video.
Steps:
1. Power on the remote control and then the aircraft, then connect the mobile phone to the
remote controller. At this time, the aircraft will begin its self-check, accompanied by a beeping
sound.
2. After the beep stops, click
on APP, and select page of “General Settings”; click
“Calibrate” on the right; it enters into mode of compass calibration when the yellow light keeps
on, the
magnetometer calibration mode is enabled.
General Settings
Grid
Sound
Param unit
s
Magnetometer
Drone information
Metric/Imperial
