10. IMB 3D MACRO SETTINGS CHANGES
May 18, 2016
33
HFR UPGRADE MANUAL
FOR SX-2001/SA-2100(A/T) TO SX-000(A/T)R
DIGITAL CINEMA SERVER WITH
INTEGRATED MEDIA BLOCK
The settings for 3D output control ( ‘3D Sync Polarity’, ‘Dark Time’, ‘Output Delay’ and ‘Phase
Delay’) should be customized according to the type of 3D system used (RealD, XpanD or
Dolby3D).
10. IMB 3D MACRO SETTINGS CHANGES
Server software version 9.0 makes changes to the IMB 3D output format. The following
projector macro changes are required to support these changes.
Note:
These are required changes on the projector. IMB 3D output will not function
properly unless these changes are made.
Software version 9.0 enables IMB 3D output in ‘4:4:4’ format. This can be enabled on the SMS
configuration page, by selecting SMS
Configuration
CineCanvas
IMB 3D 4:4:4 (see Figure
36).
Figure 36 IMB 3D 4:4:4 configuration on SX-2000(A/T)R server
10.1 Barco Series 2 Projector
The IMB 3D macros on existing Barco S2 projectors are configured to use the
‘GDC_IMB_422.input’ file.
If the ‘IMB 3D 4:4:4’ option is checked in SMS configuration, all IMB 3D macros should use the
input file named ‘Mediablock.input’.
10.2 NEC Series 2 Projector
The IMB 3D macros on existing
NEC Series 2 projectors are configured for ‘4:2:2’ input.
If the ‘IMB 3D 4:4:4’ option is checked in SMS configuration, all IMB 3D macros should be
changed to use ‘4:4:4’ input.
