6. INSTALLING AND CONNECTING THE GDC INTEGRATED MEDIA BLOCK (IMB) INTO THE PROJECTOR
May 18, 2016
21
HFR UPGRADE MANUAL
FOR SX-2001/SA-2100(A/T) TO SX-000(A/T)R
DIGITAL CINEMA SERVER WITH
INTEGRATED MEDIA BLOCK
6.4
Connecting the IMB to the SX-2000(A/T)R server
The IMB on the projector and the SX-2000(A/T)R server must be connected for
proper operation. There are two cables to be connected between the projector and
the SX-2000(A/T)R server:
CAT-5E network cable to connect the network between the projector and the
server. The projector and server can also be connected through a network switch.
Network cable for connecting the IMB installed on the projector and to PCI-e slot on
the server back panel.
To insert the network cable into the IMB or server, push the network cable connector firmly
into the respective network port.
Connecting to the IMB and the projector Connect the network cable as shown in Figure 21.
Figure 21 Connecting cables on the projector
Connect the network cables as shown in Figure 22.
Figure 22 Connecting cables on the SX-2000(A/T)R server
