- 13 -
February 21
st
, 2023
USER MANUAL FOR AIB-2000 IO (INPUT-OUTPUT) BOX
9. AIB-2000 CONNECTIONS
9 AIB-2000 CONNECTIONS
9.1 Installation
The AIB-2000 is a 1U Rack device and most conveniently installed in the amplifier rack it connects to.
NOTE:
Instead of connecting the AIB-2000 to the power grid directly, it is recommended to plug the
device’s mains connection to a UPS outlet.
9.2 AC Mains Supply
The AC Main connection is made via the
IEC C13
connector.
The DC series amplifiers have an automatic power factor correction system - PFC - for a perfect mains
network interface. The PFC minimizes the reactive power reflected on the network and reduces the
harmonic distortion on voltage/current waveform: in this way the amplifier is seen as a resistive load from
the mains network. Furthermore, the system allows performance to be maintained even in case of varying
mains voltage.
9.3 Routing Diagram
Refer to
Section 4
for the signal routing diagram of your AIB-2000.
