DU-AG-0021-100 Rev A 4/15/08 GCX Corp. Page 3 of 6
4. Attach Tip Caution Label
to front center of top shelf bezel as shown below.
Mounting Low Profile Mount in Channel
The following parts and hardware are included in this installation kit (hardware not shown):
Tools Required
• Phillips screwdriver
1. Slide the Base Plate into the channel and move to desired mounting position.
2. Tighten two (2) thumb screws to secure position in channel.
Installation Note:
Do not attach the Table Top Mount to the Arm/Mounting
Adapter if you will be mounting an MP20/30 monitor equipped with the mounting
interface shown in photo (right). See "Mounting the Monitor on the Arm" (page 6)
for instructions specific to this type of mounting plate.
Item #
Description
Qty
1
Low Profile Column with Channel Mount
1
2
M6 x 8mm Flat Head Machine Screw (FHMS)
2
3
M6 x 12mm FHMS
1
*4 Spacer,
MP20/30
1
*5
M6 x 16mm PHMS
2
*See "MP20/30 non-Table Top Mount" on page 6 for use of these parts.
Do Not Attach Table Top Mount if MP20/30
Monitor is Equipped with This Mounting Interface
Thumb Screws (2)
1
4