6/12
EN
Note: The best oxygen savings will be obtained if there is one pulse per
breath. It is worth experimenting with positioning of the cannula in the
nose to achieve this.
Always ensure that the flow control knob has been engaged and not
placed between two settings otherwise the flow control head will not
deliver correct or any flow of medical gas.
Flow control head can have an “end stop” in between the maximum flow
position and the position „1“. Do not try to apply excessive torque on the
flow control knob when it stops on the maximum flow position (during
clockwise rotation) or in position „1“ (anticlockwise position).
The flow rate of medical gas must be prescribed and provided by a
clinically trained user.
6.3. AFTER USE
•
Remove the nasal cannula from the patient.
•
Turn off at the cylinder shut-off valve by turning the hand wheel in a
clockwise direction.
•
Disconnect the tube from the flow outlet.
•
Refit pressure outlet and flow outlet protection cap. Before refitting the
caps, ensure they are clean.
7. ACCESSORIES AND SPARE PARTS
Always use the GCE original spare parts!
Accessories:
For information about current Accessories, please contact GCE.
Spare parts:
For information about current spare part list, please contact GCE.
8. CLEANING
DO NOT dismantle the unit.
DO NOT allow moisture to enter the unit.
DO NOT use polish including spray polish, oil, or any other cleaning
agent or lubricant.
Dust the exterior surfaces with a clean dry lint-free cloth.
A clean, slightly moist, lint free cloth may be used to remove persistent
marks.
DO NOT pack the equipment until completely dry.
DO NOT use cleaning solutions containing ammonia!
DO NOT expose to water or any other liquid.
DO NOT expose to high temperature (such as autoclave).
Summary of Contents for ELITE ELH BS PROBE
Page 11: ......
