GCC Technologies StellarMark 3DS, User Manual

Page: 82 / 87

StellarMark 3DS User Manual
Rev.2.0
78
`
Keeping your StellarMark 3DS series clean and well maintained will ensure quality
output, consistent reliability, and extended product life. Smoke, dust, or residue build-
up inside the laser system or the mechanical components can cause a reduction in
the laser power, reduced product life cycle, and other potential problems which can
be prevented in advance.
This section will cover how to perform regular maintenance for the dust protection
window of the 3DS series.
The frequency of the cleaning schedule will depend on the number of variables
such as the types of material you work with, the work environment, the frequency
of usage, the quality of the exhaust system, etc.
10.1
Regular Spot Check
Before each usage, inspect the machine, the power and connector cables,
and the working environment. Look for frays in cables, proper connections,
and any abnormalities that could have an effect on marking performance
and/or user safety. Be sure that the 3DS series is properly secured and
mounted.
If a problem ever arises with the MM3D software or the StellarMark laser
marker, be sure to notify GCC local representative as soon as possible.
WARNING
⚫
Always turn off and unplug the laser marker before cleaning!
⚫
Electrical shock may occur if you do not turn off and unplug the marking
system before cleaning.
⚫
Damage may occur to the system if you do not turn off and unplug the
3DS series before cleaning.