GCC Technologies StellarMark 3DS, User Manual

Page: 12 / 87

StellarMark 3DS User Manual
Rev.2.0
8
`
•
Connect the machine to a properly grounded power outlet. Ensure the
voltage of the power source is identical to the voltage of the machine.
•
Do not attempt to modify or disassemble the laser module.
•
Do not attempt to remove or modify any component of the machine’s
laser interlock safety system.
•
Ensure the immediate work area of the machine is well-ventilated.
Odors, vapors, and dust are byproducts generated during the laser
marking and cutting process. An exhaust system is recommended.
Please contact GCC or your local GCC distributor for more information.
•
Do not laser heat-sensitive surfaces or materials that may generate toxic
fumes, such as PVC and Teflon.
•
Regularly clean and maintain your machine according to our cleaning
and maintenance instructions. Doing so will ensure a machine that will
operate effectively and safely over a long period of time.
1.6 Operating Environment
Please follow the guidelines when considering a suitable location to set the
LaserPro StellarMark 3DS series. Improper work environments may lead to
operational malfunction and/or unsafe working conditions. The LaserPro
StellarMark 3DS series should be placed and operated in a clean
environment, avoid places where the machine is exposed to high
NOTE
3DS series laser machine is shipped with a single pair of safety
goggles. If additional safety goggles are required, please contact GCC
directly or an authorized GCC distributor. If you wish to purchase one
on your own, please make sure the safety goggles meet these
requirements:
190 - 534 nm OD5+
910 - 1,070nm OD6+
Visible Light Transmission: 23.5%