Jaguar V User Manual
The Control Panel 3-5
3.4 Menu Items
Below describes the functions of menu items
Menu or Key
Function
Setting
Default
--- Media sizing ---
Roll
To measure media width.
Maximum Media
Length 150 meters
Edge
To measure media width and pull the media back till the front
paper sensor open.
Maximum Media
Length 150 meters
Single
To measure media width and length.
Maximum Media
Length 10 meters
--- POWER ---
To indicate the power status.
[ Arrow Keys ]
1. To move the tool carriage position on X or Y axis.
2. To select functions or change values of settings.
[ ENTER ]
1. The displayed parameters will be saved automatically.
2. To set a new origin at the present tool carriage position.
In “offline” mode, moving the tool carriage to desired
position by [Arrow Keys], then press [ENTER] key to set a
new origin. While moving with the parameters of XY-axes
displayed, press [MISC] key will enable fine-tune
movement; press [MISC] key again to disable the function.
[ PAUSE/RESUME ]
To temporarily halt the cutting process.
To resume the process by press [Pause/Resume] key again.
[ ONLINE/OFFLINE ]
1. To switch between online mode and offline mode.
2. To stop the cutting job or abort the change of setting.
Once press this key, the cutting job will be terminated
immediately and cannot be resumed.
[ OFFSET ]
Select Unit
Select: OK:ENTER
Scale Length
Select: OK:ENTER
Scale Width
Select: OK:ENTER
Image Scale Length
Select: OK:ENTER
Image Scale Width
Select: OK:ENTER
Metric (cm/g), Unit (inch/ g),
Unit (cm/ oz), English (inch/ oz)
