Jaguar V User Manual
The Control Panel 3-3
Blade Length Adjust
Select: OK:ENTER
Set Length 0.00mm
Change: OK: ENTER
Test Blade Holder
OK: ENTER
Test Blade Length
OK: ENTER
Turn CW O Turn
N:ONLINE OK: ENTER
Adjustment completes
OK: ENTER
3.3 Menu in Off-line Mode
Press [ON/OFF LINE] to switch to the offline mode
[
速度
]
Offline For System Setup
move origin M
X: Y:
[
]
[ DATA CLEAR
]
CLEAR
]
Clear Data Memory
N:ONLINE OK:ENTER
[ FORCE]
5~600 with an increment of 5 (gram force)
Force:80 gf
OK: ENTER
[ OFFSET ]
0.000~1.000 with an increment of 0.025 (mm)
Offset: 0.275 mm
OK: ENTER
Square Cut
Select: OK:ENTER
[CUT TEST]
Repeat AAS Job
Select: OK:ENTER
Pattern: Cross, Arrow
Pattern Setting
Select: OK:ENTER
Pattern: Arrow
Change: OK: ENTER
Ratio: 100%, 200%, 300%, 400%
Ratio Setting
Select: OK:ENTER
Ratio: 100%
Change: OK: ENTER
Redo Jobs in Memory
Select: OK:ENTER
Recut #1
Select: OK:ENTER
Copy #1
Select: OK:ENTER
Recut number: 0-99
Copy number: 1-999
After sending AAS job
High, Medium, Low
Speed: 3~153 with an increment of 3 (cm/s)
[ SPEED ]
Speed: 3~153 with an increment of 3 (cm/s)
Draft, Fair, Normal, Fine, Small Letter
Speed:
72 cm/s
Select: OK: ENTER
Quality: Normal
Select: OK: ENTER
UP Speed:
72 cm/s
Select: OK: ENTER
Up Accel.: Medium
Select: OK: ENTER
