Expert Pro User Manual
Operation 4-3
4.1.2 Loading the Roll Media
1. Firstly, put the roll holder guide bushes on two roll holders. (Figure 4-4)
2. Option A (Use the media flanges) (Recommended)
Insert a roll media flange at the end of each roll media and tighten the thumbscrew until the roll
media is firmly gripped (see Figure 4-5).
Then put the roll media on the roll holders. Adjust the position of the roll media ensure that
media flanges are able to run in the grooves of roll holder guide bushes (Figure 4-6).
Figure 4-4
Figure 4-5
Figure 4-6
