34
W
INDOWS
98
PRINTING SOFTWARE OVERVIEW
The software required to set up your Windows 98 computer is located on the Elite 12 Series
CD-ROM. For Windows 95 software installation instructions, go to page 42.
You can install the Elite 12 Series software on your computer using Plug and Play. This will
work if you are installing the software on a computer which is connected to the printer
through the parallel port.
If the printer is not connected to the computer through the parallel port, go to the section
“Using Add Printer” immediately following Plug and Play instructions.
Windows 98 uses a Wizard to help you install printer software. A Wizard is a series of dialog
boxes. In each dialog box you make configuration choices then click the Next button to
move to the next dialog box.
Part of the software you will need is contained on the Windows 98 CD-ROM or floppy
disks. If your computer was not supplied with the disk(s), follow the special instructions
provided when you reach this step of the installation process.
W
INDOWS
98
PLUG AND PLAY INSTALLATION
Part of the software you will need is on the Windows 98 CD-ROM. You must have
this disk ready, along with the Elite 12 Series CD-ROM, when you install the Elite
12 Series software on your Windows 98 computer.
1. If the computer is running, shut it down.
2. With the computer powered off, attach the
printer cable to the computer and printer. Add
paper to the paper tray.
3. Turn on the printer. Verify that the printer LCD
panel reads “READY”. Start the computer.
