Vhandy Technology
GC-3822 user manual
2. Equipment installation and use
This chapter will explain in detail the installation method, wiring method, the
meaning of indicator light and the meaning of interface of GC-3822 module.
2.1 Module fixing
The installation method of the GC-3822 module is shown in Figure 2.1. You
need to use a flat-blade screwdriver for auxiliary installation.
Figure 2.1 GC-3822 module installation
First, you need to install the fieldbus coupler on the rail, and then attach the
GC-3822 module to the right of the fieldbus coupler or other modules to add
this component. As shown in Figure 2.1, insert the GC-3822 module inwards
along the slot until the latch snaps and makes a “click” sound.
The GC-3822 module needs to be used with the GCAN-PLC-400/510 series
controller or the GCAN-8000/8100 series coupler, and can be directly powered
by the coupler, so there is no need to separately provide additional power toit.
2.2 Wiring method
As shown in Figure 2.2, first use a flat-blade screwdriver to insert into the
square hole and press the screw in the square hole. Then insert the cable into
the circular hole. After plugging in, pull out the screwdriver, and the cable can
be firmly locked in the circular hole.
