GBF PL960M, User Manual, Page: 11 / 23

2.1 Adding devices to your ControlCam2
account
Configuring a new device
Before configuring a new device (Outdoor station or Skybox), it is
necessary to perform the factory reset.
1. With the device powered on, Hold the ‘call’ button on Outdoor
Stations or ‘reset’ button on Skyboxes for 1 minute.
2. The device’s LEDs will flash. After, a long beep can listen.
3. When the LEDs light on means the factory reset was performed
successfully.
Then, you can continue configuring your device, using the smartphone.
2.1.1 Configuring a new device using Android
1. Wait 2 minutes after the factory reset, allowing the device to restart
properly.
2. Make sure your smartphone is connected to the Wi-Fi network in
which the device (Outdoor Station or Skybox) will work on.
3. Inside the app, click on the floating “add” button.
4. Choose the ‘Configure via Wi-Fi’ option.
5. Click ‘Next’ to start searching automatically the new device on the
network. When found, a popup window will appear showing the Wi-Fi
network and asking its password. (If the search finds more than one
new device, a popup screen will appear showing the identification of
each one. Choose the desired one, looking on the GID label placed on
the device).
6. Enter the Wi-Fi password, and press ‘OK’.
7. A popup message will appear, showing the device was configured
successfully, press ‘OK’ to confirm.
8. In the device’s details screen, insert the default password ‘1234’,
change the device’s name to the desired name, and press ‘Save’. (Do
not change the GID identification).
9. Now you can see the device’s image on the ‘Home screen’. To
access it, click on its image or its identification.