![background image](http://html1.mh-extra.com/html/gbc/shredmaster-5160x/shredmaster-5160x_service-manual_571122009.webp)
9
5.0 TROUBLESHOOTING
SYMPTOM
PROBABLE CAUSE
CORRECTIVE ACTION
Shredder does not
operate, no Indication of
power
Power cord disconnected.
Stand-by/Off/Reverse switch
defective
Connect power cord
Test (section 5.4) and
replace if necessary
Shredder does not
operate, with indication of
power present
Cabinet door open
Shred bag full
Motor thermal cut off
triggered
Door sensor defective
Control board defective
Defective capacitor
Motor defective
Close door
Empty bag
Allow motor to cool
Test (section 5.4) and
replace if necessary
Test (section 5.4) and
replace if necessary
Replace capacitor
Check motor input voltage
replace motor if necessary
Shredder does not
operate, (automatic mode
only)
Photo diode defective
Control board defective
Test (section 5.4) and
replace if necessary
Shredder runs
continuously
Defective forward/reverse
switch
Dust or scratch on photo
sensors
Defective PC board
Receiver defective
Emitter defective
Test (section 5.4) and
replace if necessary
Clean or replace
Test (section 5.4) and
replace if necessary
Sheet capacity
diminished
Cutters need lubrication
Cutters out of time
Dull cutters
Worn bearings
Lubricate cutters
Time cutters (See Figure
6.8)
Replace cutters
Replace bearings
Summary of Contents for Shredmaster 5160X
