![background image](http://html1.mh-extra.com/html/gbc/shredmaster-5160x/shredmaster-5160x_service-manual_571122012.webp)
12
6.0 DISASSEMBLY/ASSEMBLY/
ADJUSTMENTS
6.4 Motor Removal (cont.)
8. Remove the four 10mm hex head
screws from the gear cover.
9. Remove ground strap from RH side
frame.
10. Remove master link from chain,
remove chain.
11. Remove four 13mm motor bolts.
12. Disconnect the motor wiring
harness and ground lead.
13. Slide the motor towards the inside
of chassis.
6.5 Gearbox Chassis Removal
1. Complete Section 6.2, Upper Cover
Removal.
2. Complete Section 6.3, Lower Cover
Removal.
3. Complete Section 6.4, Motor
Removal.
4. Remove two 5mm allen head screws
and washers from the main cutter
gear and upper cutter drive gear.
5. Using a gear puller, remove the main
cutter gear assembly.
6. Remove the upper cutter gear.
⇒
⇒
Please note the orientation of the
cutters key ways for assembly
purposes. They must be in series for
proper timing.
6. Remove two deflectors from each
side by removing two pan
head screws from each side.
7. Remove four nuts and two hex head
bolts (13mm & 15mm) from
the gear box chassis. The chassis can
now be removed.
6.6 Cutter Shaft and Stripper
Assembly Removal
1. Complete Section 6.2, Upper Cover
Removal.
2. Complete Section 6.3, Lower Cover
Removal.
3. Complete Section 6.4, Motor
Removal.
4. Complete Section 6.5, Motor Chassis
Removal
5. Remove two 13mm hex head bolts
(opposite of the motor side) from
support bars.
6. Remove the bag full spring.
7. Remove four 15mm lock nuts from
left hand side frame.
8. Remove plastic deflectors from the
cutting head.
9. Remove side support bracket from
left hand side.
CAUTION!
Sharp Objects!
Gloves must be worn before
proceeding!
10. Carefully Maneuver cutting head
assembly out towards motor side.
11. Remove three side plate supports
and shims from each
side cutter
assembly.
12. Separated cutters.
13. Slide the four cross support bars out
from the strippers.
14. Slide strippers and fillers out from
the cutters.
Summary of Contents for Shredmaster 5160X
