background image

Mercury Anti-Jam Technology

Safety First

Introduction

 

 

 

 

 

Lights and Icons Explained

 

 Illumination

  

Cool 

down

 Bin 

full 

 

 

Colour of LED

 Green

Red Orange

 Orange

Auto button

 light 

 

 

Binfull

 

  light

light

Motor overheat

 

 

 

light

 

flash

 

Anti Jam (too much paper)

 

 

 

light

 

 

Reverse mode 

 

light

After 2 mins no use

a

 Indicator Panel

b

   Power On Button

c

 On/Auto Button

d

 Reverse Button

e

 Anti-jam Indicator

f

  CD Safety Feed Guide

g

 Pull-out Bin

d I

Lights and

Li ht

d

Li ht

Thank you for choosing this shredder from GBC. We are sure it will 
serve you well, but please take a little time to study these 
instructions to ensure you get the best out of your machine.

Mercury Shredders will only shred stacks of paper that are within 
the shredders sheet capacity. Eg. A shredder with a capacity 
between 20 and 22 sheets will not allow the shredding of more 
sheets than this.

Sensors in the paper feed area measure the thickness of paper 
about to be shredded. The ability to shred or not is communicated 
through red and green lighting. Green means that the stack of 
paper is within the shredders sheet capacity and OK to shred. Red 
means that you have too much paper, remove some sheets in 
order to shred.

Given that you are unable to shred more sheets of paper than the 
shredder is capable of shredding, paper jams are prevented.

This prevents time wasted through reversing paper and 
unblocking jams not to mention the mess it can create.

IMPORTANT! 

Do not attempt to shred more paper while paper is 

already being shredded. By attempting to force paper down the 
front or back of a batch of paper that is being pulled into the 
machine, you can jam the shredder. The anti-jam technology will 
work reliably if used as instructed.

Shredders are safe to use as long as you take a few safety 
precautions.

t&OTVSFUIFNBDIJOFJTQMVHHFEJOUPBOFBTJMZBDDFTTJCMF

   power outlet, and ensure the cable is not likely to trip up a 
   passer by.

t"OZBUUFNQUUPSFQBJSUIJTVOJUCZVORVBMJmFEQFSTPOOFMXJMM

   invalidate the warranty. Please return to supplier.

t6OQMVHZPVSTISFEEFSCFGPSFNPWJOHJUPSXIFOJUJTOPUJO

   use for an extended period of time.

t%POPUPQFSBUFXJUIBEBNBHFEQPXFSTVQQMZDPSEPSQMVH

   after it malfunctions, or after it has been damaged in any 
   manner.

t%POPUPWFSMPBEFMFDUSJDBMPVUMFUTCFZPOEDBQBDJUZBTUIJT

   can 

SFTVMUJOmSFPSFMFDUSJDBMTIPDL

t5IFTPDLFUPVUMFUTIPVMECFJOTUBMMFEOFBSUIFFRVJQNFOU

   and shall be easily accessible.

t%POPUBMUFSUIFBUUBDINFOUQMVH5IFQMVHJTDPOmHVSFEGPS

   the appropriate electrical supply.

t%POPUVTFOFBSXBUFS
t%POPUVTFBFSPTPMEVTUFSTPSDMFBOFST
t%P/054QSBZBOZUIJOHJOUPUIFTISFEEFS

Summary of Contents for Mercury RSS2434






Reviews: