GBC Magnapunch 2.0, Installation & Operation Manual

Page: 31 / 120

Page 6-11
Magnapunch 2.0
– Installation and Operating Instructions
p
UnCh
a
Ctivation
The Magnapunch 2.0 can be activated using either
the Foot Pedal or the Tabletop Trigger. The activation
mode is selected on the
HOME screen. Using
SELECT, toggle between the modes. The mode
highlighted in green is the active punch mode.
Home Screen with Foot Pedal Selected. Figure 35.
f
oot
p
edal
Using the Foot Pedal allows you to ensure that the
sheets are lined up before the punch is activated.
To punch using the Foot Pedal:
Turn the Magnapunch 2.0 On and set the 1.
PUNCH
mode to
FOOT PEDAL
.
Push the stack of media into the Punch Throat 2.
completely, while sliding to the left, so that the
stack presses against the Edge Guide.
Media Lined up for Punching. Figure 36.
Depress and then release the Foot Pedal. 3.
Remove the stack of media. 4.
t
aBletop
t
RiGGeR
The Tabletop Trigger allows you to quickly punch
stacks of sheets. Pressing the stack against the
Trigger, activates the punch.
To punch using the Tabletop Trigger:
Turn the Magnapunch 2.0 On and set the 1.
PUNCH
mode to
TABLETOP TRIGGER.
Push the stack of sheets into the Punch Throat 2.
completely.
Media Ready for Punching. Figure 37.
Slide the stack to the left into the Tabletop 3.
Trigger, activating the punch.