background image

4

Introduction

Thank you for purchasing this GBC

®

 Pouch Laminator. The laminator 

heats up to operating temperature quickly and retains its heat so you 
can laminate your documents without waiting.  The laminator also 
provides cold lamination for pressure sensitive adhesive lamination 
pouches. The laminator provides audible and visual indication that it 
is ready to laminate. The laminator goes into a standby mode after 30 
minutes of inactivity.
Please take a little time to study these instructions to ensure you get the 
best out of your machine. Your new laminator may emit a slight odour 
during the initial operation. It is normal and will diminish after a few 
hours of operation.

• 

 

DO NOT LAMINATE AN EMPTY POUCH. 

•  

Never insert the loose end of the pouch first into the machine. This 
could cause the machine to jam. 

•  

Before laminating important or unique documents, always run a test 
pouch through the laminator using a similar type document

•  

Do not attempt to do single sided lamination. This will destroy the 
laminator

• 

 As soon as hot lamination is completed, remove the lamination from 
the rear of the machine and place on a cool flat surface for cooling to 
prevent the pouch from curling

•  

Do not block the vent slots, this will cause the laminator to overheat

•  

Do not cut pouches prior to lamination.

Laminating Tips

Operation

  Connect power cord to appropriate power source.
  Push the power button to turn on the machine. The indicator will 

glow. 

  Move the switch button to the appropriate pouch gauge thickness and 

material you are laminating. 

  Position the document to be laminated into a GBC laminating pouch, 

so that the document is aligned to the folded sealed edge and the 
right and left borders are equal.

  When the ready light glows, insert the pouch and its contents 

straight into the machine, leading with the folded edge.

  The laminated item will automatically exit the rear of the machine. 

After the pouch has stopped moving, immediately place it on a flat 
surface to cool for one minute before handling.

  If you have finished laminating, push the power button to turn off the 

machine.

NOTE: DO NOT LAMINATE AN EMPTY POUCH.

Summary of Contents for GBC A4 POLAR









Reviews: