Page 4 - 11
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
W A R N I N G
b) Raise the safety shield to its full up right
position.
c) Pull the two locator latches of the pressure
plate toward the center of the laminator.
Locator latches
INFORMATION
The Explorer 107 pressure plate will not be
used in conjunction with the Digital Feeder.
d) Remove the pressure plate and set in a safe
place away from the laminator.
e) Pull the two safety latches on the feed table
toward the center of the laminator.
Bottom view
of feed table
Safety latches
f) Lift the table from the front and pull out away
from the laminator. Set the table in a safe place.
Lift from the front of table
INFORMATION
The Explorer 107 feed table will not be used
in conjunction with the Digital Feeder.
