![background image](http://html1.mh-extra.com/html/gbc/digital-feeder/digital-feeder_operation-and-maintenance-manual_3859020041.webp)
Page 4 - 7
Installation
Digital Feeder Operation and Maintenance Manual
© GBC Pro - Tech February 2000
4.5 Crated
Tools required
• # 2 Phillips head screwdriver
• Large adjustable wrench
• Crow bar
• A second person
a) Inspect the machine for any obvious shipping
damages upon receipt.
INFORMATION
Claims for shipping damages must be
handled between your insurance company
and the shipping compnay.
b) Remove the top of the crate and then the sides
in the order shown in Figure 4.5.1
CAUTION
Do not allow the top to fall into the crate.
It can damage the feeder.
INFORMATION
Do not put packing screws on the floor.
They can cause problems when trying to roll
the feeder into position or you can become
injured if stepped on.
CAUTION
A second person must support the side
labeled 5 in Figure 4.5.1 It can fall and
damage the Feeder or cause harm to
you and others.
Figure 4.5.1 Disassembling of the crate
2
3
1
5
4
INFORMATION
The crate components can be reused for
shipping the machine again or may be
disassembled and recycled.