Location of controls
1
Document separator
2
Clippings tray (located at side of machine)
3
Comb opening teeth
4
Paper centering dial
5
Electric punch button (C450E & C366E only)
6
Comb opening knob
7
On/Off switch (C450E & C366E only)
8
Punching slot
9
Punching handle (C340 & C366 only)
J
Comb selector (C366 & C366E only)
K
Quick start guide
4
Special notice
Thank you for choosing a GBC Binding machine. We aim to produce
quality binding machines at an affordable price, with many advanced
features to enable you to create excellent results every time. Before
using your machine for the first time, please take a few minutes to read
through this guide and retain these instructions for future reference.
Safety instructions
YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT
TO ACCO BRANDS EUROPE. IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT ARE IMPORTANT SAFETY MESSAGES. READ THESE
MESSAGES CAREFULLY.
• In order to avoid overloading your machine, please refer to the
maximum punch guide located on the front of your machine before
punching.
• When punching PVC/PP covers, we recommend the cover be punched
with some paper either side.
• DO NOT punch metallic objects such as staples or paper clips.
• Please empty the waste tray regularly.
• Ensure that the machine is operated on a flat stable surface.
• Never lift the machine by the punching handle. Always use the hand
grips located on the side of the machine.
• The binder is not to be exposed to temperature / humidity conditions
that would cause condensation. Maximum ambient temperature ~40ºC.
m
Setting up
• Your machine is ready to use when removed from the box. Retain the
packaging in case you need to return the machine for repair.
• The punching mechanism is coated with a protective film of lubricant,
which will mark your paper. Clear this by punching scrap sheets of
paper until clean prior to binding.
C450E & C366E is approved to EN60950 and CE Standards.
Technical data subject to change without notification.
Safety tips
- C450E & C366E
• DO NOT obstruct air inlets and outlets.
• DO NOT use the binder if the power cord (mains cable) is damaged.
• DO NOT place the power cord where it may be tripped over or pulled.
Ensure it does not come into contact with hot surfaces such as pipes
or radiators. Make sure the cable is not squashed or pinched.
• DO NOT use an extension cable unless it is absolutely necessary and
then only use one of a suitable current rating (10A or greater).
• DO NOT leave the binder connected to the electricity supply when
not in use.
• DO NOT immerse the binder in water or other liquids. Doing so will
result in ELECTRIC SHOCK.
• DO NOT attempt to disassemble the binder. Always consult a qualified
person.
m
Setting up
- C450E & C366E
• Connect the binder to the electricity supply with the power cord
supplied.
• Switch ON using the ON/OFF switch located at the rear of the binder
by the power inlet socket.
• Wait while the binder goes through an automatic check procedure,
both LED’s light up.
• When complete the green LED will remain ON.
• The binder is ready for operation.
WARNING: This appliance MUST be earthed.
If in doubt consult a qualified electrician.
m
Maintenance options
• If you would like to extend your warranty coverage beyond the stated
manufacturers period, please consult your local ACCO Brands Europe
reseller for options.
Specifications
Operation mode
Max. binding size
Hole pitch
Number of punch slots
Margin depth
Punching paper (80gsm)
Punching PVC plastic foils (0.2mm)
Max. comb diameter
Binding capacity
Net weight
Dimensions WxDxH
Voltage
GBC C340 Comb Binder
manual
A4
US Pitch 9/6” / 14.28mm
21
fixed
max. 25
max. 3
51mm
450 sheets
10.45kg
440x450x200mm
n/a
GBC C450E Comb Binder
electric
A4
US Pitch 9/6” / 14.28mm
21
fixed
max. 25
max. 3
51mm
450 sheets
15.6kg
440x450x170mm
230V 50Hz AC
GBC C366 Comb Binder
manual
A4
US Pitch 9/6” / 14.28mm
21
variable
max. 30
max. 4
51mm
450 sheets
11.03kg
480x450x200mm
n/a
GBC C366E Comb Binder
electric
A4
US Pitch 9/6” / 14.28mm
21
variable
max. 30
max. 4
51mm
450 sheets
17.1kg
480x450x170mm
230V 50Hz AC
