EN
Multi Function Professional Puncher
–
B1
3. QUICK START GUIDE
6.
Restrictions:
Professional Puncher must be connected to AC power to enable
any feature of the machine. Below are three modes of operation of
Professional Puncher.
1.
Bypass Mode:
This operation will allow paper to pass through the Professional
Puncher without being punched.
This is the default mode of operation for Professional Puncher.
Make
sure
the
Punch
Icon
is
not
selected
in
the
printer’s
User
Interface.
2.
Punch Mode:
This operation will punch the trail edge of all sheets that pass
through the Professional Puncher.
Step 1:
A properly configured die set must be inserted before
running punch mode. See section 4.A for details on Die set
changes and follow the labels on the die set for configuration.
Step 2:
Before starting a print job select the Punch mode from
the
printer’s
UI.
Professional Puncher will now function in Punch mode.
3.
Crease Mode:
This operation will crease in the middle of all sheets that pass
through the Professional Puncher.
Step 1:
A Crease die-set must be inserted to enable the Crease
mode. See section 4.A for details on Die set changes.
Step 2
: For some controllers, before starting a print job select
the
Crease
mode
from
the
printer’s
UI.
See printer manual.
Professional Puncher will now function in Crease mode.
Note: Crease mode is out of specification for certain printer
configurations.
In some cases, creasing will not prevent cracking when the media
is folded.
UP
DOWN
ENTER/
OK
Layout of Professional Puncher LCD User Interface
4.
Die Set Configuration:
To configure the Die Set for the desired sheet size that is being
processed see section 8
–
Die Set User Manual.
5.
Upgrade:
If you are varioPRINT 140/130 user without crease mode, you can
improve punch mode performance. If you want do so, please
contact your authorized dealer.
I.
Using clear cover other than 7 mil may cause a jam to
occur and could require a service call.
II.
Creasing accuracy may decrease, in certain operating
environments, when stiff paper or coated paper with a
smooth surface is used. In this case, turn <REG.
ACCURACY> of the Multi Function Professional Puncher-
B1 to <ON>. However, turning this on causes reduced
productivity.
III.
When punching or creasing 200gsm paper or above, with
grain direction in the long orientation, paper jams may
occur. The problem may not occur with the grain direction
in the short orientation.
5
Summary of Contents for B1
Page 2: ......
Page 93: ...RU Multi Function Professional Puncher B1 3 OK 4 5 1 2 3 Professional Puncher 93...
Page 97: ...RU Multi Function Professional Puncher B1 1 1 4 4 A 2 3 2 1 3 3 2 using 1 4 6 9 4 A 5 97...
Page 109: ...CHI Multi Function Professional Puncher B1 3 1 2 3 1 4 A 1 4 2 1 2 4 4 A 6 9 3 5 109...
