9
GB
AdvancedPunch
TM
Pro
Displaying Information on the LCD Panel
1.
Die type
This is the type of die-set that is currently installed in the
punch.
2.
Die cycles
This is the total number of sheets punched with the currently
installed die-set.
3.
Punch cycles
This is the total number of punched sheets the system has
processed.
4.
Firmware
This
displays
the
current
level
of
firmware
of
AdvancedPunch Pro.
6. PROBLEM SOLVING
Probable Cause
Probable Cause
No power, won’t punch
Power cord not attached to back
of machine or not properly
plugged into the wall.
Punched holes not aligned with
the edge of the paper
Follow instructions on die set
labels to properly configure the
die for a specific sheet size
Sheet jamming repeatedly at die
set area.
Remove the die-set, inspect the
die throat to see if there is any
stuck paper chad.
Insert Chip tray message on the
LCD interface.
Make sure the Chip tray is fully
inserted.
7. SPECIFICATIONS
Speed
Up to 144 sheets per minute
Punch Sheet Size and
Edge
LEF- Long Edge Fed
SEF- Short Edge Fed
US Sizes
LTR LEF
LTR SEF
LTR SEF Double Punch
Statement LEF
Legal SEF
Ledger SEF
Ledger SEF Double Punch
9" x 12" SEF
9" x 12" SEF Double Punch
9" x 12" LEF
12" x 18" SEF
12" x 18" SEF Double Punch
ISO sizes
A4 LEF
A4 SEF
A4 SEF Double Punch
A5 LEF
A3 SEF
A3 SEF Double Punch
SRA4 SEF
SRA4 SEF Double Punch
SRA4 LEF
SRA3 SEF
SRA3 SEF Double Punch
Tab Stock
US Sizes
LTR, with 3, 4, 5, 8,10 tabs
Statement, with 3 and 5 tabs
ISO Sizes
A4, with 5 and 10 tabs
A5, with 3 and 5 tabs
Paper Stock
Plain: 75gsm - 300gsm
(20# bond to 110# cover)
Coated: 120gsm - 300gsm
(32# bond to 110# cover)
Clear Cover
7mil
Paper Bypass Mode
Sheet size
Paper sizes and stocks same as printer
Punch Capacity
Single Sheet
Power Supply
115V, 60Hz, Single Phase
230V, 50Hz, Single Phase
Electrical
Amps and
Frequency
115V; 3.8A; 60Hz
230V; 1.9A; 50Hz
Safety Certification
cULus
Dimensions
L: 725mm; W: 445mm; H: 990mm
L: 29"; W: 17.5"; H: 39"
Weight
99 kg
218 lbs
Shipping Weight
127 kg
280 lbs.
Manufactured
Assembled in Taiwan
