background image

 

2

IMPORTANT SAFEGUARDS

 

 

Warning:  For your protection, do not connect the equipment to electrical power or 
attempt to operate it until you read these instructions completely.  Keep these 
instructions in a convenient location for future reference. 

 

Warning:  To guard against injury, the following basic safety precautions must be 
observed in the set-up and use of this equipment. 

 

GENERAL SAFEGUARDS 

§ 

Use the equipment only for its intended purpose of punching and binding 
documents. 

§ 

Use caution when operating the electric punch. 

§ 

Do not place the equipment on any unstable stand or table.  The system may fall, 
causing serious bodily injury.  Move the equipment and table combination with 
care.  Quick stops, excessive force, and uneven floor surfaces may cause the 
system and table to overturn.  Before moving the equipment, pull out the Debris 
Tray and discard paper to prevent spilling inside the machine. 

 

ELECTRICAL SAFEGUARDS 

 

Warning:  To reduce the risk of shock, always observe the following safeguards. 

 

§ 

The equipment must only be operated from the type of power source indicated in 
these Operating Instructions and the serial label located on the rear panel of the 
unit. 

§ 

The socket (outlet) should be located near the equipment and should be easily 
accessible. 

§ 

The equipment is provided with an attachment plug suitable for use in the country 
of purchase.  Connect the plug only to a suitable receptacle. 

§ 

Unplug the equipment before moving it, or when it is not in use for an extended 
period of time. 

§ 

Do not operate the unit with a damaged power supply cord or plug, after it 
malfunctions, or after it has been damaged in any manner. 

§ 

Do not let the power supply cord contact hot surfaces or sharp objects. 

§ 

Do not overload electrical outlets beyond their capacity, as this can result in fire 
or electrical shock. 

 

CARE INSTRUCTIONS

 

§ 

Wipe exterior only with a damp cloth.  Do not use any detergents or solvents. 

§ 

Empty the Debris Tray frequently.  Failure to empty the tray may result in debris 
lodging in the equipment and causing damage to the equipment. 

 

 

Reviews: