GB UNI-ALL, Manual, Page: 66 / 152

66
REMOVING THE COVER
The seat cover consists of five parts which are fixed to
the seat with press studs. Once you have released the
fasteners the cover parts can be removed.
NOTE! Before removing the separate parts of the seat
cover, please ensure that the cover is already positioned
above the decorative parts.
To remove the covers, please follow the instructions below:
• Undo the press studs on the lower side of the cover
for the shoulder belts. Then you can remove the cover
sideways.
• Activate the adjustment handle for the headrest and
move this to its highest possible position.
• Open and loosen all the press buttons on the head-
rest. Then pull the cover off forwards.
• Pull down the cover on the left and right side panel
of the side walls. Then undo the press studs on the
interior of the shoulder wings to be able to entirely
remove the cover.