3
ASSEMBLY:
Tools Required:
Phillips head screwdriver, adjustable wrench.
PEDESTAL/PORTABLE CART ASSEMBLY:
1. Remove grill head from carton and place on flat surface.
2. Remove pedestal/cart from carton and set upright with
casters on ground.
3. Open hood on grill head and remove warming rack, and cooking
grids and set aside.
4. Carefully lift hood assembly, bezel and inner liner off of
grill body. See figure 1.
5. Position grill body on top of pedestal/cart and fasten with
seven (7) ¼ - 20 x ½” bolts for Model I and II, ten (10) for
Model III with locking nuts. See figure 2.
6. Drip pan can now be installed into position. See figure 3.
SIDE SHELF ASSEMBLY:
1. Remove side shelf from carton
2. Remove the 4 - ¼” - 20 x ½” bolts from left side of grill
body.
3. Align the holes in side shelf with the holes in the grill body and
fasten with four bolts removed earlier.
4. If second side shelf is used on right side of grill attach
in same manner.
