2. Shimano System quick start
2.1 Installing a carrier type battery
2.1.1 Drager accu plaatsen
1. Insert the battery into the rail from the
rear of the bicycle
Slide the battery forwards and push
firmly into position.
2. Return the key to the locked position
and then remove it.
2.1.2 Removing a carrier type battery
1. Insert the key and release the lock.
(1)
Push the on-off button to switch OFF the power, and insert the key into the jack socket
on the battery holder.
(2)
Turn the key until you can feel that contact has been made.
51
HANDLING THE BATTERY
Removing the Battery
Removing the Battery
CAUTION
• Firmly hold the battery during removal or transport, being careful not to drop it.
Failure to do so may cause the components to fall and break or cause injury.
Rear carrier mount type
1.
Insert the key and release the lock.
(1) Press the power switch to turn the power OFF, and then insert the key into the socket
on the battery mount.
(2) Turn the key until you feel it make contact.
Power switch
Socket
Key
2.
Carefully remove the battery.
2. Carefully remove the battery.
49
HANDLING THE BATTERY
Installing the battery
Rear carrier mount type
1.
Insert the battery into the rail from the rear of the bicycle.
Slide the battery to the front and push it in firmly.
Rail
2.
Remove the key.
Return the key to the locked position, and then remove it.
Down tube mount type
1.
Insert the battery from below.
Align the concave section on the bottom of the battery with the convex section on the
battery mount, and then insert the battery.
48
