Gazelle GC2020, User Manual, Page: 5 / 12

5
EN
before use. Always use the correct charger and
refer to the manufacturer’s instructions or equipment
manual for proper charging instructions.
n) Do not leave a battery on prolonged charge when
not in use.
o) After extended periods of storage, it may be
necessary to charge and discharge the cells
or batteries several times to obtain maximum
performance.
p) Retain the original product literature for future
reference.
q) Use the cell or battery only in the application for
which it was intended.
r) When possible, remove the battery from the
equipment when not in use.
s) Keep the cell or battery away from microwaves and
high pressure.
t) Dispose of properly.
TECHNICAL DATA
Model GC2020
Power 20V
No-Load Speed
Gear 1 0-550/min
Gear 2 0-2000/min
Rated Impacting Frequency 0-36000/min
Max
.
Drilling Diameter
Steel Ø13mm
Brick wall Ø13mm
Wood Ø38mm
Net Weight (without battery) 1.3kg
※ Due to the continuing program of research and development, the specifications herein are subject to change
without prior notice.
Intended use
•Driving in and loosening screws.
•Drilling in wood, metal, wall and plastic.
a) Instructions for putting into use
1) Setting-up or fixing power tools in a stable position as appropriate for power tools which can be mounted on a
support or fixed to a bench or the floor;
Symbol
To reduce the risk of injury, user must
read instruction manual
Do not burn
Do not charge a
damaged battery pack
Do not dispose of batteries.
Return exhausted batteries
to your local collection or
recycling point.
WARNING