12
GAZELLE MANUAL
English–
12
0 276 001 USPen | (22.6.15)
Bosch eBike Systems
eShift with SRAM DD3 Pulse
The gear hub of the SRAM DD3 Pulse works on a speed-de-
pendent basis. Regardless of which gear is engaged on the
derailleur gears, one of the three gears of the gear hub will
automatically be engaged (
“ Autom. Gear Selection”
).
The engaged gear will be shown briefly on the display when-
ever the gear of the gear hub is shifted.
If the eBike is brought to a standstill from a speed of more
than 6 mph, the system can automatically switch back to a
set
“starting gear”
. The
“starting gear”
can be set in the
basic settings menu (see “Displaying/Adapting Basic Set-
tings” on page English–14).
In the
“ Gear”
mode you can use the
“–”
or
“+”
button on
the operating unit to switch back and forth between several
defined transmission ratios. The engaged transmission ra-
tio (gear) is shown on the display.
In the
“ Gear”
manual mode, the system can also auto-
matically switch back to a set
“starting gear”
.
The drive unit recognizes the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
eShift with Shimano Di2
For Shimano eShift you use the Shimano control lever to
shift gears.
The engaged gear will be shown briefly on the display when-
ever the gear of the gear hub is shifted.
The drive unit recognizes the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a standstill from a speed of more
than 6 mph, the system can automatically switch back to a
set
“starting gear”
. The
“starting gear”
can be set in the
basic settings menu (see “Displaying/Adapting Basic Set-
tings” on page English–14).
Indications and Settings of the
on-board computer
Switching the on-board computer On/Off
To
switch on
the on-board computer, briefly press the
On/Off button
5
. When the internal battery pack is suffi-
ciently charged, the on-board computer can also be
switched on when not inserted in the holder.
To
switch off
the on-board computer, press the On/Off
button
5
.
When the on-board computer is not inserted in the holder
and no button is pressed, it automatically switches off after
1 min to save energy.
If you do not use your eBike for several weeks, re-
move the on-board computer from its holder.
Store
the on-board computer in a dry environment at room
temperature. Regularly recharge the on-board comput-
er’s battery pack.
Battery charge-control indicator
The battery pack charge-control indicator
i
indicates the
charge condition of the eBike’s battery pack, and not the
charge condition of the on-board computer’s internal bat-
tery. The charge condition of the eBike’s battery pack can
also be read from the battery pack’s LEDs.
On indicator
i
, each bar of the battery pack symbol is equiv-
alent to a capacity of approx. 20 %:
Once there are no remaining LED bars illuminated
on the charge-control indicator, the motor support
is gently switched off and the charge-control indica-
tor begins to flash. The flashing charge-control indi-
cator means there is only enough battery power re-
maining to power the eBike lights for approximately
2 more hours. This does not account for other con-
sumers (e.g., automatic gearbox, charging external
devices at the USB port).
When the on-board computer is removed from holder
4
,
the last indicated battery pack charge condition is stored.
The eBike battery is fully charged.
The eBike battery should be recharged.
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Range
AMM
PMWH
MIN
MPH
KM/H
d
b
c
a
f
e
g
h
i
OBJ_BUCH-2209-003.book Page 12 Monday, June 22, 2015 11:18 AM
